Teltonika TRB140

The Teltonika TRB140 is an ultra-small, lightweight, and energy-efficient industrial gateway equipped with mission-critical LTE Cat 4 capabilities, Gigabit Ethernet interface, digital Inputs/Outputs, and micro-USB port. Because of its compact design, this product is perfect for projects and applications where a sole gadget requires reliable internet connectivity. TRB140 is specially engineered to be used in the industrial sector and has a wide range of software security features, such as SMS control, Firewall, Open VPN, IPsec, Remote Management System (RMS), and FOTA support.

TRB140

Teltonika TRB140 Key Features

  • 4G/LTE (Cat 4), 3G, 2G connectivity
  • Rugged aluminium housing
  • Easy to use, secure and feature rich OpenWRT based operating system
  • Wide range of supported power supply voltages
  • Small size, easy installation
  • Compatible with Teltonika Remote Management System


Teltonika TRB140 Technical Specifications

Mobile

  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
  • SMS/Call: SMS status, SMS configuration, Call utilities

Ethernet

  • LAN: 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX

Network

  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, MQTT, Wake on LAN (WOL)
  • Routing: Static routing
  • Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
  • Firewall: Port forwards, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation
  • QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port
  • DHCP: Supported >25 service providers, others can be configured manually

Security

  • Authentication: Pre-shared key, digital certificates, X.509 certificates
  • Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
  • OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
  • GRE: GRE tunnel
  • PPTP, L2TP: Client/Server services can run simultaneously

Monitoring & Management

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
  • FOTA: Firmware update from sever, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration
  • MQTT: MQTT Broker, MQTT publisher
  • JSON-RPC: Management API over HTTP/HTTPS
  • Modbus: Modbus TCP status/control
  • RMS: Teltonika Remote Management System (RMS)

System Characteristics

  • CPU: ARM Cortex-A7 1.2 GHz CPU
  • RAM: 128 MB (50 MB available for userspace)
  • FLASH memory: 512 MB (200 MB available for userspace)

Firmware / Configuration

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
  • FOTA: Update FW/configuration from server
  • RMS: Update FW/configuration for multiple devices
  • Keep settings: Update FW without losing current configuration

Firmware Customisation

  • Operating system: RutOS (OpenWrt based Linux OS)
  • Supported languages: Busybox shell, Lua, C, C++
  • Development tools: SDK package with build environment provided

Input/Output

  • Configurable I/O: 2 x Configurable Digital Inputs/Outputs
  • Events: SMS status 

Power

  • Connector: 4 pin industrial DC power socket
  • Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
  • PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
  • Power consumption: < 5 W 

Physical Interfaces (Ports, LEDs, Anntenas, Buttons, SIM)

  • Ethernet: 1 x RJ45 port, 10/100/1000 Mbps
  • I/Os: 2 x Configurable Digital Inputs/Outputs on 4 pin power connector
  • USB: Virtual network interface via USB
  • Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED
  • SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
  • Power: 4 pin DC connector with 2 x configurable Digital Inputs/Outputs
  • Anntenas: 1 x SMA for LTE
  • Reset: Restore factory settings button

Physical Specifications

  • Casing material: Aluminium housing
  • Dimensions: 64.4 x 74.5 x 25 mm (L x W x H)
  • Weight: 134 g
  • Mounting options: Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options

Operating Environment

  • Operating temperature: -40 °C to 75 °C
  • Operating humidity: 10 % to 90 % non-condensing
  • Ingress Protection Rating: IP30

Regulatory & Type Approvals

  • Regulatory: CE/RED, EAC, RoHS, WEEE

EMI

  • Standards: Draft ETSI EN 301 489-1 V2.2.0, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
  • ESD: EN 61000-4-2:2009
  • RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
  • EFT: EN 61000-4-4:2012
  • Surge protection: EN 61000-4-5:2014
  • CS: EN 61000-4-6:2014
  • DIP: EN 61000-4-11:2004

RF

  • Standards: EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-1 V11.1.2, EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2

Safety

  • Standards:
    – IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
    – EN 50385:2017
    – EN 62232:2017

The Teltonika TRB140 is available in the UK from leading Teltonika Distributor, Millbeck.

Teltonika also manufacture a range of network switches including POE switches such as the TSW200 8 port, unmanaged POE switch.